Blog - Page 38 of 50

24
Jun

Download Engineering Standard | SAES-B-019

Attique / 4 years
0
1 min read

Portable, Mobile and Special Fixed Firefighting Equipment This Standard contains the minimum mandatory requirements for providing portable, mobile, and special fixed firefighting equipment for process, light industrial, and service facility areas. Table 1, “Occupancy and Protection Needs,” summarizes fire protection equipment applications included in this Standard, as well as in SAES-B-017 and SAES-B-018. Exception:Where this […]

24
Jun

Download Engineering Standard | SAES-B-018

Attique / 4 years
0
1 min read

Air Foam Systems for Storage Tanks This Standard defines the minimum mandatory requirements for the design and installation of fixed air foam fire protection systems for atmospheric storage tanks. Section 8 also includes requirements for fixed air foam systems that may be used in a variety of facilities such as offshore platforms and loading racks. […]

24
Jun

Download Engineering Standard | SAES-B-017

Attique / 4 years
0
1 min read

Fire Water System Design This Standard defines the minimum mandatory requirements governing the design and installation of fire water systems. Exceptions:a) Where this Standard is in conflict with specialized requirements for offshore platforms, covered in SAES-B-009; for piers, wharves, sea islands, in SAES-B-060; and bulk plants/air fueling operations, in SAES-B-070, those Standards shall govern.b) Fire […]

24
Jun

Download Engineering Standard | SAES-B-014

Attique / 4 years
0
1 min read

Safety Requirements for Plant and Operations Support Buildings SAES includes the minimum mandatory safety requirements governing the siting, design, and construction of (a) all onshore in-plant buildings, (b) out-of-plant buildings within 500 m of a plant perimeter fence, (c) offshore buildings, with SAES-B-009 taking precedence over SAES-B-014 in case of conflicts, and (d) service buildings, […]

24
Jun

Download Engineering Standard | SAES-B-009

Attique / 4 years
0
1 min read

Fire Protection and Safety Requirements for Offshore Production Facilities This Standard provides mandatory requirements for the design and installation of fire protection and safety features of offshore production facilities, including platforms for tie-in, gas-oil separation, gas compression, accommodations, and wellheads.

24
Jun

Download Engineering Standard | SAES-B-008

Attique / 4 years
0
1 min read

Restrictions to Use of Cellars, Pits, and Trenches This Standard provides the minimum mandatory requirements for the use of below-grade unventilated enclosures such as cellars, pits, valve boxes,telecommunication service points and trenches in which hazardous vapors may collect. This applies for all on-site and off-site facilities, pipeways, cross-country transportation pipeline corridors, flowlines, trunklines, gaslift pipelines, […]

24
Jun

Download Engineering Standard |SAES-B-006

Attique / 4 years
0
1 min read

Fireproofing for Plants This Standard covers the minimum mandatory requirements for the design and installation of fireproofing to protect plant equipment and support structures from potential hydrocarbon fires. Exceptions: Where this Standard is in conflict with specialized requirements for offshore platforms (SAES-B-009) or for piers, wharves, and sea islands (SAES-B-060), those Standards shall govern. This […]

24
Jun

Download Engineering Standard | SAES-B-005

Attique / 4 years
0
1 min read

Spacing and Diking forAtmospheric and Low-Pressure Tanks This Standard provides the minimum mandatory requirements for spacing and diking of tanks located onshore and above grade that store or process flammable or combustible liquids at atmospheric and at pressures up to 100 kPa(ga) (15 psig) and temperatures at or above ambient. Tanks include vertical cylinders with […]

24
Jun

Download Engineering Standard | SAES-A-301

Attique / 4 years
0
1 min read

Materials Resistant to Sulfide Stress Corrosion Cracking This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, field processing facilities, and refining facilities (see Table 7) to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service (liquid, gas, and/or multiphase). This standard does not include […]

23
Jun

Download Engineering Standard | SAES-A-300

Attique / 4 years
0
1 min read

Regulated Vendors Listfor Drilling Wellhead and Valves This standard identifies acceptable manufacturers for Wellhead equipment and releated valves under Material Group 006000.