Blog - Page 32 of 50

03
Jul

Download Engineering Standard | SAES-J-100

Attique / 4 years
0
1 min read

Process Flow Metering This standard defines the minimum mandatory requirements governing the design and installation of process flow instruments.The requirements of this standard are additions, exceptions, modifications, or deletions to the requirements of Process Industry Practice PIP PCCFL001 “Flow Measurement Criteria” (June, 1998) as referenced in Section 5 of this standard.

02
Jul

Skin Care Routine After Removing Make-up

MaliCK / 4 years
0
2 min read

Removing make-up is not always enough to protect your skin from different skin problems. After removing make-up, we should follow some steps, I will guide you about those steps. Hopefully, they will help you. Steps are listed below: 1. Remove your make-up Easily remove your make-up, dirt, and other impurities from the skin to reduce […]

02
Jul

Things You Should Have Before Going To Any Travel

MaliCK / 4 years
2
1 min read

Hi guys, as you know there are many articles on the packing checklist but here you will find easy and simple helpful material if you’re going on a trip alone or with your family. Use this ultimate checklist to remind yourself that you have done with everything you need to take with you. Don’t have […]

30
Jun

Download Engineering Standard | SAES-J-005

Attique / 4 years
0
1 min read

Instrumentation Drawings and Forms 1.1 This standard defines the minimum mandatory requirements governing the design of Saudi Aramco instrumentation drawings and forms. 1.2 The following drawings and forms are required for representation ofinstrumentation in Saudi Aramco plant design. 1.3 The drawings and forms described in this standard are required forrepresentation of instrumentation in Saudi Aramco […]

30
Jun

Download Engineering Standard | SAES-J-004

Attique / 4 years
0
1 min read

Instrumentation Symbols and Identification The ANSI/ISA-5.1-1984 (R1992) Instrumentation Symbols and Identification shall be used as basis for this standard, unless otherwise specified in paragraph 4. This standard establishes a uniform means of designating instruments andinstrumentation systems used, in Saudi Aramco, for measurement and control. The identification is also used as equipment tag (mark) numbers on […]

30
Jun

Download Engineering Standard | SAES-J-003

Attique / 4 years
0
1 min read

Instrumentation – Basic Design Criteria This Engineering Standard covers the basic requirements for the selection, design, and application of process instrumentation and control systems. This entire standard may be attached to and made a part of purchase orders.

30
Jun

Download Engineering Standard | SAES-J-002

Attique / 4 years
0
1 min read

Regulated Vendors List for Instruments This Standard identifies acceptable manufacturers for instrumentation products. This Standard does not apply to purchasing procedures associated with instrument materials for replenishment of SAMS stock.

30
Jun

Download Engineering Standard | SAES-J-001

Attique / 4 years
0
1 min read

Instrumentation Index This standard is a compilation of Saudi Aramco documents governing the design and installation of instrumentation and instrument systems. The documents are indexed according to document type.

30
Jun

Download Engineering Standard | SAES-H-204

Attique / 4 years
0
1 min read

General Specifications and Application Procedures of Heat-Shrink Sleeves to Coated Pipe This Standard gives the mandatory requirements governing the storage, handling and installation of heat-shrink sleeves (primarily those described in SAES-H-002 for APCS-110, APCS-111 and APCS-112) which are used for coating the field girth weld area of externally coated pipe. The external pipe coating may […]

30
Jun

Download Engineering Standard | SAES-H-201

Attique / 4 years
0
1 min read

General Specifications for Over-the-Ditch External and Internal FBE Coating of Field Girth Welds This Standard covers minimum mandatory requirements governing the application and installation of over-the-ditch fusion bonded epoxy (FBE) coating for external and internal field girth welds of pipelines having diameters from10″ to 63″.In addition, Procedures for each specific job shall be prepared by […]