Central Office (CO) Digital Telephone Switching Systems This standard covers mandatory requirements governing planning, engineering design and implementation of Central Office (CO) Digital Telephone Switching Systems.
VHF/UHF Land-Mobile and Fixed Radio Communication This standard presents minimum mandatory requirements for engineering of VHF/UHF mobile and fixed radio telecommunications systems which will promote compatibility between existing and future equipments. It includes transmitters, receivers, portable/personal transceivers and antennas for both base stations and vehicles.
Powered In Plant Communications This standard defines the minimum mandatory requirements governing the design and installation of AC powered, in-plant party paging communication systems for use in Saudi Aramco industrial facilities such as Petroleum Refineries, Gas Oil Separation Plants (GOSPs), Natural Gas Liquid (NGL) Plants and Water Injection Plants (WIPs).
Telecommunications: Station Protection This Standard prescribes mandatory requirements for station protection (less than 25 pair cables) of telecommunications plant.
Synchronous Digital Hierarchy Transmission Systems This standard covers mandatory requirements governing the design and implementation of digital transmission systems using Synchronous Digital Hierarchy (SDH) technology for fiber optic and digital microwave/radio systems that operate at speeds of 155 megabits per second and above.
Telecommunications: Protection Equipment in Communication Buildings This Standard prescribes mandatory requirements for electrical protection in switching centers, central offices (CO) and other telecommunication equipment buildings.
Communication D.C. Power System This Standard presents the minimum mandatory requirements of Communications Power Systems for the use in Saudi Aramco communications facilities such as central telephone switching offices, microwave terminals, repeater stations and UHF/VHF radio equipment.
Telecommunications – Symbols, Abbreviations and Definitions This standard describes mandatory requirements governing the symbols and abbreviations used for telecommunication facilities. Electrical, electronics and radio symbols are not included in this standard.
Telecommunications Standards Introduction and Indices The purpose of the Telecommunications Saudi Aramco Engineering Standards (SAESs) is to establish and publish the acceptable standards, specifications and design principles that are to be applied to every telecommunications system and service within Saudi Aramco Telecommunications. These are mandatory engineering requirements that shall be met, or an approved waiver […]
Installation of Utility Piping Systems This Saudi Aramco Engineering Standard (SAES) defines the minimummandatory requirements for the installation of non-electric utility piping systems in all areas except the following:
English 
