Heating, Ventilating and Air Conditioning (HVAC) This Standard defines the minimum mandatory requirements governing the design and installation of Heating, Ventilation and Air Conditioning (HVAC) systems for all Saudi Aramco buildings and facilities.
FOUNDATION Fieldbus (FF) Systems This standard defines the requirement for design, specification, installation,configuration, commissioning and maintenance for FOUNDATION™ Fieldbus based control systems. This specification will only discuss the voltage mode (parallel coupling) 100 ohm medium attachment unit, as defined in IEC 61158- 2, operating at a signal speed of 31.25 kilobits per second (i.e., H1).
Intrinsically Safe Systems “Intrinsic safety” is a design and construction method that can be applied toelectrical instruments and their interconnection wiring for safe use in ahazardous (classified) location.
Electrical Systems for Instrumentation This Standard establishes the design criteria for the installation of power and wiring systems for electrical instrumentation.
Instrument Air Supply Systems This Standard defines the minimum mandatory requirements governing the design and installation of instrument air supply systems.
Control Buildings This standard together with the referenced standards and specifications provides minimum requirements for the design and construction of control buildings. The standard covers Central Control Buildings, Local Control Buildings, and Process Interface Buildings. This standard does not cover maintenance buildings or analyzer buildings.
Control Valves This standard prescribes the minimum mandatory requirements governing the design, specification, sizing, selection and installation of control valves and regulators. This standard does not cover on/off valves.
Burner Management Systems for SRU Trains This engineering standard establishes minimum requirements for the design, construction and installation of burner management systems (BMS) for the gas fired equipment in sulfur recovery unit (SRU) trains. SRU trains have typically 5 independently fired furnaces. The BMS system for each fired furnace is defined herein.
Surge Relief Protection Systems This standard prescribes the minimum mandatory requirement for sizing, selection and installation of liquid surge relief valves and surge relief systems. Unsteady state transient analysis is not covered in this standard and it is assumed that a complete pressure profile of the system requiring protection shall be performed by others and […]
Protective and Condition Monitoring Equipment for Rotating Machinery This standard defines the minimum mandatory requirements governing the design and installation of protective and condition monitoring equipment for rotating machinery.
English 
