Blog - Page 14 of 50

16
Jul

Download Engineering Standard | SAES-X-400

Attique / 4 years
0
1 min read

Cathodic Protection of Buried Pipelines This standard prescribes the minimum mandatory requirements governing the design and installation of cathodic protection systems for onshore pressurized buried metallic pipelines outside of plant facilities. This standard does not address subsea pipelines or pipelines operated by Saudi Aramco Community Maintenance Departments

16
Jul

Download Engineering Standard | SAES-X-300

Attique / 4 years
0
1 min read

Cathodic Protection of Marine Structures This standard prescribes the minimum mandatory requirements governing the design and installation of cathodic protection for both offshore and shore side sections of marine structures exposed to soil, seabed, or seawater environments. The standard applies to both coated and uncoated structures.

16
Jul

Download Engineering Standard | SAES-W-017

Attique / 4 years
0
1 min read

Welding Requirements for API Tanks This standard specifies the welding requirements for shop and field fabrication and installation, repair, or modification of tanks designed and built to API STD 650 and API STD 620 and repaired to API STD 653. These requirements are in addition to the requirements of the API Codes and ASME SEC […]

16
Jul

Download Engineering Standard | SAES-W-016

Attique / 4 years
0
1 min read

Welding of Special Corrosion-Resistant Materials This standard specifies the requirements for welding and testing of specialcorrosion-resistant piping materials. This is defined as stainless steel and nickelbased alloys for piping in severe corrosion service and high temperature service, as defined below.

16
Jul

Download Engineering Standard | SAES-W-015

Attique / 4 years
0
1 min read

Strip Lining Application This standard specifies the welding and testing requirements for installing a corrosion-resistant strip lining in process equipment as a field modification. The application of this standard is primarily for pressure vessels, including heat exchangers. This standard is to be considered as a supplement to SAES-W-010. These requirements are in addition to the […]

16
Jul

Download Engineering Standard | SAES-W-014

Attique / 4 years
0
1 min read

Weld Overlays and Welding of Clad Materials This standard specifies the requirements for welding and testing of:a) Corrosion-resistant and hardfacing weld overlaysb) The overlay portion of weld joints in materials with corrosion-resistantcladding, either integral or weld overlay.c) Cladding restoration of clad materials.

16
Jul

Download Engineering Standard | SAES-W-013

Attique / 4 years
0
1 min read

Welding Requirements for Offshore Structures This standard specifies the welding, heat treatment, Nondestructive Testing(NDT), and hardness testing requirements for welding of offshore structures. These requirements are in addition to the requirements of API RP2A and AWS D1.1. For materials outside the scope of API RP2A, CSD shall determine ifsupplementary requirements are required.

16
Jul

Download Engineering Standard | SAES-W-012

Attique / 4 years
0
1 min read

Welding Requirements for Pipelines This standard specifies the welding, heat treatment, Nondestructive Testing(NDT), and hardness testing requirements for welding pipelines and equipment (e.g., scraper traps) to ASME B31.4 and ASME B31.8, both onshore and offshore, including shop and field fabrication, repair, or modification. Distribution and other facilities which use B31.4 as the piping design code […]

16
Jul

Download Engineering Standard | SAES-W-011

Attique / 4 years
0
1 min read

Welding Requirements for On-Plot Piping This standard specifies the welding, heat treatment, Nondestructive Testing(NDT), and hardness testing requirements for shop and field fabrication and installation, repair, or modification of piping to ASME B31.3. Theserequirements are in addition to the requirements of ASME B31.3 and ASMESEC IX.

16
Jul

Download Engineering Standard | SAES-W-010

Attique / 4 years
0
1 min read

Welding Requirements for Pressure Vessels This standard specifies the welding, heat treatment, and hardness testingrequirements for shop and field fabrication, repair, or modification of pressure vessels and heat exchangers to ASME SEC VIII. These requirements are in addition to the requirements of ASME SEC VIII and ASME SEC IX.